Tool Cabinet

  I have not written in a long time.  I have been working on a new project which is a tool cabinet.  I'll post pictures soon and with any luck I will finish it by the end of the year.  I just thought I would post something to show the blog isn't dead. 

Mat's Bookmarks

instructables
  Find out how to make everything.

make
  Make magazine's web site.  They have a project area but it's not nearly as good as instructables.  The one nice part is you can find all the projects from the past issues.

tested
  Run by the mythbusters! 

pinterest
   Ok yes it's loaded girly stuff but you can also find woodworking tips and plans on this site.

Ana White
   Great plans that are simple to follow and free.

failblog
  Spend far to much time laughing at this site.

boing boing
  Geek news

sparkfun
  Electronic parts

adafruit
  Electronics parts

LED wizard
  LED wizard that will show you how to wire up your LED's and what resister to use.

templates
http://www.waitingforfriday.com/index.php/Building_a_robot_arm
http://www.robotoid.com/printable-templates.html


minecraft:
piston timer http://imgur.com/a/AmPF6
http://minecraft.gamepedia.com/Crafting
http://minecraft.gamepedia.com/

C code
http://www.learn-c.org/
http://c.learncodethehardway.org/book/


usb interface
http://www.rakeshmondal.info/pic18f4550-project-tutorial-part-1-USB

drop down voltage
http://makezine.com/projects/portable-pi-power-raspbery-pi-to-go/

Pirate Radio
http://makezine.com/projects/make-38-cameras-and-av/raspberry-pirate-radio/

art blog
http://scotlandbarnes.blogspot.com/

Ascension
https://ascensiongame.com

swing game
http://www.swingame.com/index.php/documentation/how-to/item/how-to-draw-a-panel.html?category_id=81

c puzzles
http://chortle.ccsu.edu/CPuzzles/PartA/CpuzzlesAsection01.html

carving cloner
http://woodgears.ca/copy_carver/plans/index.html

tiny cards
http://www.leafcutterdesigns.com/shop/wsps/tiny-letters.html

Adam Savage

Adam Savage has been one of my heroes for years now.  It started off with watching "Mythbusters" and seeing him building objects to test myths.  I always found it fascinating when he would make a fake human body out of Ballistic gel and then turn around and make an air chamber.   It was the range of items he could make that made me love watching him.  As a maker I wanted this kind of flexibility to make whatever I can dream of.  A few years ago I was looking into him and found a lecture he had given at TED called "How Simple Ideas Lead To Scientific Discoveries".  I loved the lecture because it made it seem possible for someone like me to make scientific discoveries.  I have always been interested in science but without a lab and a bunch of letters after my name it seemed like I couldn't contribute.  I was thrilled to find that he had given a lecture at the BoingBoing Ingenuity theatrical event.  In that speech he gave his "10 Rules to Sucess".  I found all the rules interesting and thought provoking.  Rule 9 "Fail" really is important to me because the fear of failure has kept me back too many times and I need to remember it's important to fail.  He also gave a funny and great lecture on failure at Defcon 17.   Poking around for this post I found another lecturer called  "My Obsession With Wbjects and The Stories They Tell".  I can't encourage you enough to explore these links and listen to what Adam has to say.

  Adam if you happen too ever read this, thank you for all works and sharing what you have learned with the world.

speed build power cord spinner

  Once in a while I need something to solve a issue but don't have a lot of interest in building it.  This is one of those cases.  I needed something to keep my power cord in order but didn't care a lot about how it looked.  I took a few minutes during a file transfer and drew up a plan.  From there I didn't really measure I just took a pile of scrap wood and started building.   It's not pretty but it was free and works.

  This is the final product with the cord wound up.

On the right you can see the handle which spins the center.  The piece sticking out on the bottom is for my foot to hold it up.  I might add some feet now that I know it works.   The small section of cord on the right is the plug that goes into the wall.  I used zip ties to secure it to the piece which you can see better here:

   I gave my self about ten feet of cord to get to the wall.  Then I just spun the handle and wound the cord up in the center.  I did use two pieces to make the center wider.  I didn't want the cord being wound too tight and damaging it.

Now that you get an idea how it works here is it without the cord.

  It's not perfect but like I said it was a speed build that I just wanted done.  I built it out of mostly 1" thick pieces.  The center shaft is a old broken shovel.  The shovel was tapered so it caused the center  be off a little.  If you used a real dowel it would probably look better.   I had a old dowel around so the side pieces to hold the 10' of cord for the wall are made with the dowel and a 1" square.  I used a hole saw to drill through the pieces for the dowel.  I used glue and small screws I had around to hold it all together.

  One feature that I did think about while I built it, was I wanted to be as flat as possible.  If you look at the picture above the entire unit lays flat.  Mostly I just had to make sure to put the handle on right. 

  Just thought I would post a few pictures, maybe it will interest someone.  At least it shows that I was in my shop :) 

  You can get things like this that look nice at a hardware store.  The issue I had with them was mostly cost.  I didn't really want so spend anything and I already had a nice cord.  Also the units at the store tend to shorter or thinner gauge then what I wanted and had.

washer and dryer pedistals

So bending over to switch the laundry was getting old so I wanted to build some pedestals.  To buy them you're looking at spending $130 each.  I built mine for about $100 with plenty of scrap for another project or two.  It's large enough to hold the dryer and washer.  I also made the space between decking a few extra inches to fit our laundry baskets underneath. 

I looked around and found these plans:
http://ana-white.com/2011/01/sausha%E2%80%99s-washerdryer-pedestals

I love Ana White's site, the projects are things that I would have in my house and in my skill range.  A lot of projects out there are way too hard for me at this point or look like something from the 70's.

So I'm not going to post plans since you can go to Ana's site and get great plans there.  There are only two modification I made.

1) I used two 2X4's instead of 4X4 for the legs, which she says you can do.  She has a metal bracket in the plans but I just cut one 2X4 3.5" longer.  Then I cut the outside corner off.  If you look at step three and just picture the metal bracket replaced with wood you will get the idea.  If you want picture just post a comment.

2) I used straight rectangle molding on the sides.  This hid the seams including my decking cut which was a little off.  Now I went to Home depot and it's $0.88 a foot which seemed like a lot.  So I went over to lumber and bought another 2X4.  I cut the 1/4" strips off to use as molding which looked great.  The first strip I tossed into my scrap pile since it has a rounded edge.  I'll find something to use it for.

Here it is with primer on it

I got it in place last night.  Few things to keep in mind if you do this project.  Make sure it does not block the plug.  Mine is right at the height of the plug but I lucked out that I had enough room to pull it forward so I can plug in my dryer.  This made the washer and dryer very high which is what we wanted but I was still surprised when I saw it in real life.  Make sure you really think about the total height before you build it.  I was also surprised how heavy the washer was, so get as many people to help as you can. 

ubuntu packages

I like to keep notes on the package management commands.  I don't use it all the time so it's nice to have it on hand.  All these except the dpkg command need to be run as root.  Suggested method is using sudo <command>

See all packages on your system:  dpkg --get-selections

Install a package: apt-get install  <package name> 


Update your package list: apt-get update

Upgrade to the latest packages: apt-get upgrade

Upgrade to the latest extended support version:  apt-get  dist-upgrade

Upgrade to the cutting edge at your own risk: do-release-upgrade
  I like to run with the latest when I'm running a vm since I can rebuild it easily.  For my "I just need it to work" machines I run the extended support version.  

Service and killing X

  Spent the last few days playing with my ubuntu virtual machine.  Not sure what happened but I believe something in the upgrade to the latest version went wrong.  Had a lot off issues with lightdm.  Ended up just trashing it but learned a few things along the way.



Manage services useing the service command

get service status
      service --status-all

      service sends the status-all output to stderr.  If you want to search for a service name you can run this:  service  --status-all  |&  grep <pattern> 



service restart
     service <service name>  restart
     example: sudo service lightdm restart



If X hangs you can run a few things to kill it
    Alt + PrtScn +K
               or
    Ctrl + Alt + F1
       (if you want more then one terminal you can hit F2 and F3)

Boinc client

  I'm a big fan of the boinc project.  I like that I can help with research projects of all kinds.

Web site:  http://boinc.berkeley.edu/

I'm currently using the Ubuntu client and it's running nicely.  I run it in a virtual machine to keep my data separate and so I can completely turn it off when I need too.

  After issues with my machine I had to transfer the data.  The two areas I had to transfer to keep all my settings and the units I was working was:

         settings: /etc/boinc-client
         project data:  /var/lib/boinc-client  

  I used scp to copy the data between the two systems.  I stopped the client and copied over the data.  I tend to su to root to work.  Some people like to use sudo on each command but after years of working on unix machines I just go to root.  Not saying this is right it's just what I do.

  sudo su -  

  service boinc-client stop
  cd /etc
  mv boinc-client boinc-client-old
  scp -rp  <old machine>:/etc/boinc-client  .

  cd  /var/lib
  mv boinc-client  boinc-client-old
  scp -rp  <old machine>:/var/lib/boinc-client .

  chmod -R boinc:boinc  /var/lib/boinc-client   /etc/boinc-client


Currently helping with the projects:
   FreeHal  https://www.freehal.net/
   Climate Prediction  climateprediction.net      (needs lots of disk space)
   Docking   http://docking.cis.udel.edu
   Rosseta    http://boinc.bakerlab.org/rosetta

development man pages

To install the man pages for development on Ubuntu

apt-get install manpages-dev

Robot Control Software

  I have an idea brewing in my mind for robot control software.  I was looking at arduino software and started looking at software to control it.  I know perl and some C.  I'm also reading the "art of unix programming".  Put this all together and I want to come up with a system of controlling a robot that can grow and expand as needed.

Project goals:
 1) The system should be made with as few assumptions as possible on how it will be used. 
 2) It will have a collection of parts to control the robot. 
 3) The goal is for the user to be able to replace the parts as needed and keep the parts that function for their application. 
 4) Each part will do one thing and do it well.
 5) system will use text input and output to make it easy to replace parts or add filters
 6) Increase my knowledge of C and Perl

Hello

This is my first blog.  I am starting it for several reasons.  The first is that I like to write but find that my poor grammar and spelling makes it difficult for me to express my thoughts. I am hoping this blog will force me to write more regularly, leading to an improvement in my writing skills.  I apologize in advance for the grammar and spelling you will need to endure to read my blog, but hope you will see improvement very soon!

 The second reason for this blog is that I love to build things and helping people.  I love building everything from software to wooden bookshelves.  I hope by running this blog I will be inspired to keep projects going and that I might help some people along the way.

 The format of the blog will be very similar to how I take notes.  Some entries will be long with details of my projects.  Some entries will be short and just have a useful trick or something I thought was cool.  

 Please enjoy my blog and let me know your thoughts,